EM2X
  • EM2X
  • EM2X
  • EM2X
  • EM2X

EM2X

SPECIFICATIONS
  • Paper width: 58mm
  • Valid printing width: 48mm
  • Paper thickness(μm): 60~80μm
  • Printing speed: 80mm/s and 150mm/s
  • Reliability: 100km(MitsUbIshi paper)
Overview
2-inch thermal printer module
This Panel Printer, with auto cutter for paper cutting, has plug and play capability, which greatly reduces the time-to-market. Characterized by high speed, little noise, and high reliability, it is widely used in measuring devices, medical equipments, etc. 
Features
Unique Functions:
The movable cutter is on the upper side, open the printer to eliminate paper jam, no need to retract the cutter manually required by other traditional structures.
With software command to enter standby mode with ultra  low standby current(12μA).
Use the software command to automatically adjust the heating dots and heating interval time to adapt to the peak current of power supply under different conditions.
SAM connector space is applicable for E-Journal or SAM card.
Features:
1. Used as panel printer when fixed on a iron plate,and also used as printer module when embedded in other devices.
2. With stepper motor auto-paper-cutter function, avoid cutter block or TPH burn and lower the designer's demand.
3. Support Windows
4. Max printing speed:150mm/s(at 12V) 80mm/s(at 8.5V)
5. With high-voltage and low-voltage optional.
6. High printing endurance up to 100km (by using DJ03, Mitsubishi paper or equivalent thermal paper)
7. Compact structure :107*93*105mm.
8. Optional interface: USB,RS232,RS232 TTL 
9. SAM connector space inside each is applicable for SD or SAM card (customizable).
Applications
  • Portable printers and terminals
  • Handheld terminals
  • Measuring instruments
  • Data terminal devices
  • Medical equipments
  • Taximeters
  • Specification
    Model EM2KX EM2WKX
    Printing Printing method Thermal dot printing
    Number of dots 384dots/line
    Resolution 8dots/mm(203dpi)
    Paper entry width (mm) 58mm (paper width: 57.5±0.5mm)
    Valid Printing width (mm) 48mm
    Paper roll diameter(mm) φ50mm Max
    Paper thickness(μm) 60-80μm
    Max printing speed 80mm/s 150mm/s
    Paper loading Easy loading
    Detection Paper end/black mark sensor By photo interrupter
    Head temperature By thermistor
    Operating voltage For printer head 4.2V~8.5V 12V~14V
    For motor 4.2V~8.5V 12V~14V
    For logic 3.3V~5V
    Peak current For Head 3.45A (at 8.5V64dots) 4.36A(at 14V 64 dots)
    For Motor 0.378A
    Character Character structure Alphanumeric,Chinese
    Character size 12*24
    Character per line(max) 32
    Font Normal, Double width&height, white / black reverse, bold, upside-dowr
    Instruction set: ESC/POS
    Graphics Variable width and offset, double width and height
    Instruction set ESC/POS
    Barcodes Variable with and offset

    Double width and height

    11 barcodes:normal and rotated 90°
    Barcodes type UPC-A,UPC-E EAN8,EAN13,CODE39,I25,CODABAR,CODE128,CODE11,MSI
    Interface RS232, RS232TTL, USB
    Life Abrasion resistance 100km(MitsUbIshi paper)
    Pulse activation 100 million
    Cutter 500,000cuts
    Operating Environment Operating temperature 0-50℃
    Operating humidity 10~90%RH (No condensation)
    Storage temperature -20~60℃
    Storage humidity 5~95%RH (No condensation)
    Physical Characteristics Dimension 93*107*55.5mm
    Weight(g) 152g