• TP24X
  • TP24X
  • TP24X
  • TP24X


  • Paper entry width:58mm
  • Printing width:48mm and 54mm
  • Max Printing speed:60mm/s and 150mm/s Max optiona
  • Reliability:100KM
  • Life of cutter:500,000cuts
2 inch thermal printer mechanism with autocutter
Thermal printer mechanism TP24X series is ultra compact, high speed, light weight thermal printer with autocutter, printing on 2-inch wide paper (58mm). This thermal printer mechanism, with easy loading mechanism, improves paper loading and printer mechanism maintenance greatly.
Unique Functions:
World exclusive first quick-change-cutter mode (no need to open the printer housing, just only unscrew 2 fixing screws to change the cutter)
The movable cutter is on the upper side, open the printer to eliminate paper jam, no need to retract the cutter manually required by other traditional structures.
With two paper end sensor design optional, and black mark sensor optional.
With reflective photo interrupter to detect black mark and paper end.
With stepping motor paper auto cutter function, which greatly reduce the cutter stuck, TPH burnt, and reduce the demand of designers.
With easy loading mechanism, greatly improve the paper loading and printer mechanism maintenance.
High endurance of 100km printing length (using F230AA Mitsubishi paper or equivalent thermal paper)
  • 1. Portable terminals 
  • 2. POS 
  • 3. Banking terminals 
  • 4. Fiscal electronic cash registers 
  • 5. Measurement and medical equipment 
  • 6. Ticket issuing terminals
  • Specification
    Model ATP24FP6RX ATP24MP8RX
    Printing Printing method Thermal dot printing
    Number of dots 384 dots/line
    Resolution 8dots/mm(203dpi)
    Paper entry width (mm) 58mm(paper width 57±0.5mm)
    Printing width (mm) 48mm
    Paper thickness(μm) 60~80μm
    Max printing speed 60mm/s 150mm/s
    Paper loading Easy loading
    Detection Paper end/black mark sensor By photo interrupter
    Head temperature By NTC thermistor 30KΩ(25℃)
    Platen open detection By mechanical switch
    Operating voltage For printer head 4.2V~8.5V 12V~14V
    For motor 4.2V~8.5V 12V~14V
    For logic 3.3V~5V
    For cutter motor 4.75V~8.5V 12V~14V
    Peak current For head 3.09A(at 8.5V,64dots) 2.38A(at 13.2V,45dots)
    For motor 0.3788A
    For cutter 0.3788A
    Life Abrasion resistance 100KM(by using F230AA Mitsubishi paper or equivalent thermal paper)
    Pulse activation 100 million
    Cutter 500,000 cuts
    Operating Environment Operating temperature 0~50℃
    Operating humidity 10~90%RH (No condensation)
    Storage temperature -20~60℃
    Storage humidity 5~95%RH(No condensation)
    Physical characteristics Dimension 81*42.7*18.2mm
    Weight(g) 86g
    Cable length 80mm(customizable)
    Driver board available AEM2MLMBX AEM2MBX