• TP28X
  • TP28X
  • TP28X
  • TP28X


  • Paper entry width:58mm
  • Printing width:48mm
  • Paper thickness(μm):60~80μm
  • Max Printing speed:90mm/s
  • Reliability:100KM
2-inch thermal printer mechanism
Thermal printer mechanism TP28X series is ultra compact, high speed, light weight thermal printer, printing on 2-inch wide paper (58mm). This thermal printer mechanism, with easy loading mechanism, improves paper loading and printer mechanism maintenance greatly.
1. With easy loading mechanism, to simplify and speed up paper roll replacing.
2. High printing endurance up to 100km(by using F230AA Mitsubishi paper, DJ03 paper or equivalent thermal paper)
3. Light and compact
4. The highest printing speed up to 90mm/s.
  • 1. Portable terminals
  • 2. POS
  • 3. Lottery devices
  • 4. Label lirinters
  • 5. Fiscal ECR
  • 6. Measuring instruments
  • 7. Medical equiliments
  • Specification
    Model ATP28SP6RX ATP28MP8RX
    Printing Printing method Thermal dot printing
    Number of dots 384dots/line
    Resolution 8dots/mm(203dpi)
    Paper entry width (mm) 58mm(paper width 57±0.5mm)
    Valid Printing width (mm) 48mm
    Paper thickness(μm) 60-80μm
    Max printing speed 90mm/s 150mm/s
    Paper loading Easy loading
    Detection Paper end/ black mark sensor By photo interrupter
    Head temperature detection By NTC thermistor 30KΩ(25℃)
    Operating voltage For printer head 4.2V~8.5V 12V~14V
    For motor 4.2V~8.5V 12V~14V
    For logic 3.3V~5V 2.7V~5.5V
    Peak current Head 3.09A(8.5V/64dots) 4.36A(12V/64dots)
    For Motor 0.6A 0.208A
    Life Abrasion resistance 100KM(by using F230AA Mitsubishi paper or equivalent thermal paper)
    Pulse activation 100 million
    Operating Environment Operating temperature 0~50℃
    Operating humidity 10~90%RH (No condensation)
    Storage temperature -20~60℃
    Storage humidity 5~95%RH (No condensation)
    Physical Characteristics Dimension 69.2*28.3*31.7mm
    Weight 42g
    Control board ATP28MBX