• TP33X
  • TP33X
  • TP33X
  • TP33X


  • Paper entry width:80mm
  • Printing width:72mm
  • Paper thickness(μm):60~80μm
  • Printing speed:150mm/s and 220mm/s
  • Reliability:100KM

3-inch thermal printer mechanism with autocutter
Thermal printer mechanism TP33X series is ultra compact, high speed, light weight thermal printer, printing on 3-inch wide paper (80mm). This thermal printer mechanism, with easy loading mechanism, improves paper loading and printer mechanism maintainance greatly.

1. The movable cutter is on the upper side. In this case, paper jam problem can be solved by simply opening the printer cover, which is superior to the other manufactures' traditional one of the old design that manually use the wheel to recede the cutter.
2. The world original mechanism for replacing paper-cutter quickly (without opening the printer cover. Only need to unscrew the two screws to replace paper-cutter)
3. The first to use the photo interrupter as the platen home position sensor in the world. Malfunction never occurs.
1. The highest printing speed up to 220mm/s.
2. Optional design of double paper end sensors.
3. With reflective photo interrupter to detect black mark and paper end.
4. With easy loading mechanism, to simplify and speed up paper roll replacing. 
5. With stepper motor auto-paper-cutter function, avoid cutter block or TPH burn and lower the designer’s demand.
6. High printing endurance up to 100km(recommend to use high quality thermal paper, such as F230AA Mitsubishi paper, DJ03 thermal paper)
  • 1. Customer terminals
  • 2. POS
  • 3. Ticket issuing terminals
  • 4. Barcode lirinters
  • 5. Banking terminals
  • 6. ECR
  • 7. Measurement equiliments
  • 8. Fiscal ECR
  • Specification
    Model TP33HX TP33MX
    Printing Printing method Thermal dot printing
    Number of dots 576dots/line
    Resolution 8dots/mm(203dpi)
    Paper entry width (mm) 80mm(paper width 79±0.5mm)
    Valid Printing width (mm) 72mm
    Paper thickness(μm) 60-80μm
    Highest printing speed 250mm/s 150mm/s
    Paper loading Easy loading
    Detection Paper end/black mark sensor By photo interrupter
    Platen open detection By photo interrupter
    Head temperature detection By NTC thermistor 30KΩ(25℃)
    Operating voltage For printer head 24V ± 5% 6.5V~14V
    For motor 24V ± 5% 6.5V~14V
    For logic 3.3V~5.5V
    For cutter 24V ± 5% 6.5V~14V
    Peak current For Head 2.19A(at 24V/64dots) 2.19A(at 24V/64dots)
    For Motor 0.6A
    For Cutter 0.5A
    Life Abrasion resistance 100km 50km
    Pulse activation 100 million
    Autocutter 500,000 cuts
    Operating Environment Operating temperature 0~50℃
    Operating humidity 10~90%RH (No condensation)
    Storage temperature -20~60℃
    Storage humidity 5~95%RH (No condensation)
    Physical characteristics Dimension 108.2*59*32.5mm
    Weight 160g
    Cable length 80mm(customizable)
    Driver board available AKM1CMBX ATP33MBX